Skip to main content

Setting up V10

Sigicom AcademyProductsINFRA V10, V11, V12

Setting up V10

  1. Connect your V10 Geophone with your INFRA Datalogger by using any of the available INFRA Sensor Cables.

  2. Start the Datalogger and wait for the initialization process to complete.

  3. Under the menu Nodes you’ll find your V10 unit as GEO V10- serial number, where GEO is the Customer string and serial number is the serial number.

  4. Select GEO V10- in order to set Standard (S01, S02, etc.).

Then, for the chosen standard, select:

  • Interval time

  • Record time

  • Threshold (level and ON/OFF).

5 Activate REG ON, and the measurement will be initiated.